Ellipsoidal Strobe Module         
ESM-DMX

Now project with high speed xenon strobe bursts in a standard ellipsoidal. The model ESM-DMX is a lightweight DMX strobe module that plugs easily into an ETC Source 4 ellipsoidal by simply switching end caps and attaching a lightweight (2.2 lbs) external power supply via a 3' plugable umbilical cable.Flash control signals come from a simple, low voltage Diversitronics Striker Remote or Strobe Runner or directly from a DMX control board.

• Featuring single flash, burst, variable intensity and variable rate
• DMX and analog control
• Small, light weight package (2.2 lbs.)
• Lamp life: 2 million flashes avg.; dependent on temp., rate,intensity and duty cycle; range 1,000,000 at max. continuous duty cycleto 10 million at 25% duty cycle
• Fast reccycle with 15 flashes/second
• Easy to install
• Replaceable quartz xenon  lamp 
• Operates from standard 120 Volt 50/60 Hz line voltage, specify - 240 if 240 volt 50/60 Hz operation required.
• Output 22 joules / flash
• Color temperature 5600 Deg K
  
• Microprocessor DMX-512 control on individual rates and intensities (2 channels)
• Digital assignment selector - systems of up to 256 strobes
• Power supply has 5-pin XLR connectors for DMX inputs/outputsaswell  as modular analog inputs/outputs 
• Auto recognition of control scheme
• Daisy-chain analog control compatible
• Self-resetting safety thermal switch (55 degrees C)
• Not phase sensitive
• Status indicator LED
• Valid DMX signal indicator LED
• Power on LED
• Can be used with Diversitronics Striker Remote and Strobe Runner or industry standard DMX controllers 
• Power requirements: At 120V 2 fixtures/15Amp circuit. At 240V  4 fixtures/16 Amp circuit 
• Power supply: 7"H x 5"W x 4"D (with bracket); 2.2 lbs. hanging weight
• Shipping weight: 9 lbs.

TECH SPECS

OPERATING INSTRUCTIONS

CONTACT US ABOUT THIS PRODUCT